Using Little Greene Intelligent ASP (All Surface Primer)
Preparation is key when planning an interior decorating project and using a primer is an important step to achieving a beautiful finish; it ensures a smoother adherence of paint to the surface and provides additional protection for the material being painted.
Our water-based Intelligent ASP (All Surface Primer) is suitable for priming a wide range of both interior and exterior surfaces. It is highly recommended for use with any of our finishes and it can be tinted to any shade in the Little Greene palette.
Intelligent ASP can be used for a range of internal and external surfaces including; existing paint, wood, nonferrous metals, ceramic tiles, glass and plastics. We recommend either 1 or 2 full coats, and with a quick drying time of 1 to 2 hours, you can complete your project quickly.
How to get the most out of Intelligent ASP
- Ensure your surface is fully prepared according to our Technical Data Sheets.
- Stir thoroughly before use and do not apply to surfaces when the ambient temperature is below 46°F or if there is a risk of rain during application or drying.
- If using a brush, ensure you use a high-quality, synthetic bristle brush that has been conditioned by washing in clean water and thoroughly drying with a clean, lint free cloth.
- If using a roller, use a short nap wool blend type sleeve for best appearance on smooth surfaces. Keep final strokes all in the same direction, maintaining a wet edge throughout. Never be tempted to go over already drying paint!
- Always be sure to allow the paint to thoroughly dry if using another finish on top.
